Zeitronix Zt-2 Wideband AFR Meter / Datalogging System

No matter if you have a stand alone engine management system, a piggy back fuel control or a carbureted engine. The Wideband Air Fuel Ratio Meter is a must for a serious tuner! Finally you can tune for more power, closer to the edge, precisely monitoring Air/Fuel ratio Boost, EGT, RPM and throttle position datalogging up to 9 hours of data with a blazing rate of 74 samples per seconds per graph. The ZDL software can be utilized as a real time display when using a basic Zt-2 kit without the hardware display. Zt-2 Specs: - 0.1 AFR accuracy - Operating voltage 10V to 18V - Switching power supply for oxygen sensor heater - Precise sensor temperature control - Reverse polarity protection - Integrated fuse - Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector - Wideband Oxygen Sensor included - Easy to install plug and play kit - Adjustable Narrowband Switching Point - Warning Alarms and Triggers Inputs/Outputs: - Bosch Wideband O2 sensor - Linear Wideband Output AFR=Vx2+9.6 - Nonlinear Wideband Output - Serial data output to the Zeitronix Wideband LCD Display - Serial data output for real time datalogging (PC laptop required) - RPM Input ( tachometer or primary side ignition coil input). *The RPM input works in any car and any ignition system. No additional adapters needed! - Simulated Narrowband Output to feed a stock ECU - Throttle Position - Boost Sensor - EGT - Fuel & Oil pressure - Water, Oil & Transmission Temp - Air Intake Temp - User Input/Warning Output

Important Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.