Stillen Ultra Long Tube Dual Air Intake | 2009-2020 Nissan 370Z (402852)

Nissan 370Z Dual High Flow Ultra Long Tube Air Intake by Stillen

This intake has a radically updated design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles - as a matter of fact, the kind of power we were able to pull out of the HR-series VQ engines is unheard of among performance intakes for non-turbo/non-SC'd cars.

We altered the intake layout quite a bit- our Gen III Long Tube Cold Air Intake for 370Z features an integrated system of variable diameter tubing and steps to maximize air velocity, including additional internally polished tubes that pass through the front core support for superior airflow and as few 'turns' as possible in the intake tract between the filters and throttle. The new Ultra Long Tube Cold Air Intake strategically places two large AEM filters ahead of the radiator, exposing them to the coldest-possible incoming air while also making the filters still easy to service.

The end result: A dyno-proven 17.5 Horsepower (WHP) and 13 ft/lb (WTQ) gain* on the 370Z - This translates to an estimated 20-22 horsepower gain at the flywheel. Again, let us emphasize here, this is on the STOCK ECU TUNE. No other cold air intake for the VQ can match these power gains - PERIOD.

Features

• Ultra Long Mandrel Bent Polished Aluminum Intake Tubes
• Oiled Filter
• Easy to Clean and No Need to Re-Oil
• Designed and Manufactured at STILLEN HQ and Inspected Multiple Times to Ensure Quality and fit
• Fits both 370Z and 370Z Nismo Models - Fits NISMO models with slight modification
• Includes Detailed Installation Instructions (Nismo Modification Instructions Not Included)
• Relocated Air Intake Inlets For True Cold Air Induction
• CARB EXEMPT EO# D436-22

Benefits

• Increased Throttle Performance and Horsepower
• 17.5 RWHP / 13 WTQ Gain For Enhanced Acceleration
• Increased Airflow & Filtration Efficiency Can Improve miles per gallon (MPG)
• Simple Installation - Easy Enough To Do in Your Driveway!
• Visually improves the appearance of your engine bay
• Runs Great on Stock Tune - No CEL, No Tune Needed!

Please Note: Recommended installation requires removal of the front fascia clip and slightly enlarging the holes through the front core support. You CAN install this intake system without removing the bumper, but this makes your install harder than it has to be - take our word for it, it's easier to remove the bumper.

Applications

• 2009 - 2020 Nissan 370Z
• *Also fits NISMO models with slight modification

What's In The Box?

• 2 - Air Filters
• 2 - Sets of Intake Tubes
• Couplers and Clamps
• Installation Instructions

References

• Dyno Chart

Warranty

• Manufacturer Standard Warranty