Manley Performance 2.100" Race Flo Intake Valves w/ Bead Loc Groove - Set of 4 | Multiple Fitments (11670HB-8)

6.1L Hemi Chrysler Race Flo Intake Valves w/ BEAD LOC® GROOVE - Set of 4 by Manley Performance

Race Master, and the Pro Flo versions identified as Race Flo valves, are manufactured of XH-426 material for the exhausts and NK-842 for the intakes. This series of valves is targeted at the bracket, drag and oval track racers operating below 8000 rpm - above which engine speed titanium valves are generally required.

Any engine builder successfully using EV-8 alloy ( 21-4N ) valves will find in this series of Manley valves a superior piece at a most attractive price. The Ultimate Tensile Strength charts on this page and the next, show the Manley Race Series to be equal to the best that the competitors have to offer.

Features

• Head Diameter: 2.100”
• Stem Diameter: .3125” Hollow Stem
• Installed Height: Stock
• O/A Length: 4.990”
• Tip Length: .135
• Underhead Angle/Radius: Pro Flo 10° x 5/16”
• Margin: .050"
• Seat Width: .085”
• Top Of Head: 5° Dish
• Swirl Polished and Fully Machined
• NK-842 Stainless Intake Material

Benefits

• Best for drag and oval track racers operating below 8000 rpm - above which engine speed titanium valves are generally required
• Equal to the best that the competitors have to offer
• Up to 40% flow increase in small port OE style cylinder heads
• Proven performance improvement on the flow bench

Please Note: The image provided is generic and may not be an accurate representation of the product you will receive

Applications

• 2005–2010 Chrysler 300C SRT-8
• 2006–2008 Dodge Magnum SRT-8
• 2006–2010 Dodge Charger SRT-8
• 2006–2010 Jeep Grand Cherokee SRT-8
• 2008–2010 Dodge Challenger SRT-8

What's In The Box?

• 4 - Valves

Warranty

• Manley products, due to their intended use, are sold without warranty.