Killer B Ultimate FA20 Oil Pickup | 15-21 Subaru WRX & 13-21 BRZ/FR-S/86 (10015OP)
Killer B Motorsports*SEE DETAILS
Subaru FA20 Ultimate Oil Pickup by Killer B
The OEM pickup screen is crimped in a retainer and that assembly is spot welded into the pickup ‘can’. There are a couple of flaws with this process. One is that the screen is creased where the retaining ring is crimped over it. The other is the spot weld process embrittles the screen. We pushed on the screen of new OEM pickups, and several popped wire strands, without a lot of effort.
Being known for making the best Subaru Performance Oiling Products money can buy, addressing this was right up our alley. Of course, our own spin of improvements, besides the obvious had to be made to assure set it and forget reliability that comes with our products. A means for improving performance was taken advantage of during the design process as well.
The obvious big change is the tube has no bend. No bend means no restriction, and even better coming from the OEM tube because it uses a more restrictive pinch bend. The ID of the tube has been increased, and so has the thickness. The angle of the tube points it directly at the inlet into the block. Like our EJ engine Ultimate Oil Pickup this one too uses a screen to match the OEM spec opening size of the mesh. Although, we use a higher strength screen material. The screen area has been increased over 31% which reduces the restriction and stress on the screen. Our screen is lightly pressed and welded into place assuring the wire does not gets stresses or heat damages. TIG welding throughout assures proper weld penetration and quality. The material is 4130 Alloy Steel to further provide an increase in strength over the brazed stamped steel OEM version. The units have been pressure tested to 150psi over the face of the screen without issue.
Features
- No bend in tube means no restrictions
- Tube ID has been increased over OEM
- Stronger screen, greater area, reduced stress
- 4130 Alloy Steel
Applications
- 2015 - 2021 Subaru WRX
- 2013 - 2021 Subaru BRZ
- 2013 - 2016 Scion FR-S
- 2017 - 2021 Toyota 86
What's In The Box?
- Oil Pickup
Warranty
- Manufacturer's Warranty
Customer Reviews
Better quality than OEM! If you plan to install an oil baffle plate, you may as well upgrade to the Killer B pick up tube to insure more reliability out of your FA20’s oiling system. The diameter of the tube is bigger to provide more oil flow, and is a straight 45 degree angle with no bends, unlike OEM. Highly recommend this.
Have not installed it yet but looks well made, good quality.
Much better flow with larger opening. Not many oil pan options for the Fa20 so this will help make up for the oil flow.
I would have to say the factory oil pickup vs this Killer B pickup hands down shows this is a Huge must for any build or even a factory block. Don't let your factory oil pickup kill your motor with it's massive restrictive small oil pickup pipe.
