Haltech Platinum Pro PNP ECU | 1989-1998 Nissan Skyline GT-R (HT-055101)
Give us a call to get the best prices and parts for your build. Or, just call us with a cool racing story...either way we're here.
Phone Call or Text 651-927-4510
Email - sales@maperformance.com
Call Or Text Our Experts at 651-927-4510
*SEE DETAILS
Platinum Pro Plug N' Play Engine Control Unit by Haltech
This fully progammable plug and play product opens the door to virtually limitless performance modification and tuning of your vehicle. Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU Manager Software is used for setup, calibration, and diagnostics. The software comes loaded on to a CD supplied with this unit. It can also be downloaded from the Haltech website. The Platinum Pro comes pre-programmed with a basemap built to suit a Nissan R32/R33 running a RB26DETT Engine with Standard MAF Sensors.
The Rear Auxiliary Harness is an optional accessory available for this ECU. The Rear Auxiliary Harness adds 1 Digital Pulsed Input, 2 Digital Pulsed and Digital Switched Outputs, 4 Analogue Voltage Inputs, 2 +13.8V Sensor Power Outputs, 2 +5V Sensor Power Outputs, and Additional Sensor Power and Signal Grounds.
Features
- Digital Pulsed Input
- Digital Pulsed Outputs
- Digital Switched Outputs
- Analogue Voltage Inputs
- +13.8V Sensor Power Outputs
- +5V Sensor Power Outputs
- Sensor Power and Signal Grounds
- Haltech CAN Network Compatible
- Optional Rear Auxiliary Harness (Adds each type of input/output)
Benefits
- Gain Control Over Your Engine
- Improve Engine Performance
- Optimize Fuel Injection
- Optimize Ignition Timing
Please Note:
- This ECU is designed and sold for Racing use only. Using this product for street / road use may be prohibited by law. Please check with your local vehicle authority before using this product.
- ** For configuration on the GTS-t models to be supported you must swap pins 112 (Inj 6) and 114 (Inj 4) on your harness. Potential damage will occur to your engine if this is not done.
Applications
- 1989 - 1994 Nissan Skyline R32 GT-R
- 1989 - 1994 Nissan Skyline R32 GTS-t**
- 1995 - 1998 Nissan Skyline R33 GT-R
- 1995 - 1998 Nissan Skyline R33 GTS-t**
** Refer to our 'Please Note' section for important fitment notes
What's In The Box?
- 1 - Haltech Platinum Pro Plug-In ECU
- 1 - USB Cable
- 1 - Software CD
- 1 - Haltech Sticker
- All Necessary Hardware
- Instruction Manual/Quick Start Guide
- Warranty Information
Installation Instructions
Warranty
- Haltech Limited Warranty