Ferrea Chevy/Chrysler/Ford - 2.19in Head Diameter / 3/8in Stem Diameter / 5.3in Overall Length / 0.225in Tip Length / 12 Deg S-Flo +.050 Hollow Intake Valve | Multiple Fitments (F1062P)
Ferrea RacingCompetition Plus Hollow Stem Intake Valve by Ferrea
One important factor to take into consideration to increase the engine’s rpm’s, is the valve train weight. Of course, being the valve a main component, the design has to be perfected to accomplish the weight reduction to allow higher rpm’s.
Ferrea’s latest contribution in this area is our Lightweight Hollow Stem Valves. Ferrea has developed a proprietary manufacturing process that gun drills and micro polishes the bore of a valve stem. This proprietary process insures greater structural integrity than any hollow valve on the market today. This achieves a valve reduction in weight of approximately 20 percent compared to a conventional stainless steel solid stem valve. The valves also feature friction welded tips, radial grooves, avionics chrome plated stems, seat hardness up to 42HRc and Super Flo designs to improve flow.
Features
- Friction welded tips
- Radial grooves (Shot peened & rolled)
- 42 Rc Seat Hardness
- Super Flo design
- Rapid heat dissipation to the valve guide surface
- Micro Polishes & Gun Drilled Stems
- Avionics chrome plated stems (10 Microns Thick)
Benefits
- Higher rpm’s
- Increases flow over “straight” stem diameter (Flo valves) considerably without adverse effect on reliability
- 20% lighter than conventional stainless alloy valves
Applications
- CHEVROLET, CHRYSLER, FORD (Big Block 3/8)
What's In The Box?
- 1 - Intake Valve
Warranty
- No Warranty
