ACT Twin Disc Sintered Iron Race Kit | 2003-2005 Dodge Neon SRT-4 (T1RR-D02)
ACT Clutch Kits & Flywheels*SEE DETAILS
2003-2005 Dodge Neon SRT-4 Twin Disc Sintered Iron Race Kit by ACT
T1RR-D02 race, twin disc kits are race-ready for the serious enthusiast who needs a direct bolt-in kit, requiring no additional modifications. ACT's sintered iron race discs offer the highest torque capacity of all ACT race discs and have ultra-high heat capacity. Most kits offer pedal loads 10-20% higher than stock, yet increasing the clamp load by 80-90%. All ACT twin disc kits include a CNC-machined and dynamically balanced flywheel for trouble free use. All kits undergo an exclusive four-stage, heat-treating process on all diaphragms. ACT twin disc kits include a pressure plate, two discs, floater, flywheel and alignment tool. Some kits may include a pilot bearing and release bearing. ACT Twin disc kits meet SFI Specification 1.2.
Features
- Product Weight (lbs.) - 15.5
- Torque Capacity (ft/lbs.) - 1091
- Torque Capacity Over OE - 247%
- Disc Material - Sintered Iron
- Clutch Disc Diameter (Inches) - 7.25
- Clutch Disc Diameter (Millimeters) - 184
- Input Shaft Diameter (inches) - 0.9375
Benefits
- Feel - Light to moderate pedal effort, predictable, quick engagement, quick throttle response, increased gear rattle
- Life - ACT's exclusive diaphragm, hardened posts and high heat capacity for long life under severe abuse, rigid design may increase spline wear
- Quality - Carefully engineered, precisely assembled, accurately balanced, chromoly hub is heat-treated for strength and durability
- Recommended Use - Recommended for high horsepower race use only, not intended for street
- ACT Difference - 100% clamp load tested and dynamically computer balanced for smooth high RPM reliability
Applications
- 2003-2005 Dodge Neon SRT-4
What's In The Box?
- 1 - Twin Disc Sintered Iron Race Kit
Warranty
- ACT's Standard 1-Year Limited Warranty
The ACT Race twin plate kit offers SRT-4 enthusiasts a true race-ready complete direct bolt in clutch kit that requires absolutely no modifications. The ACT Race twin plate kit utilizes sintered iron discs for maximum holding capacity (770 lbs/ft of torque) and quick shifting while also offering twice the surface area for high heat capacity and long life. Each kit has an overall weight of 15 lbs as compared to the 31 lb stock kit (a 52% decrease in weight) and results in a very low moment of inertia. With ACT’s ability to design and manufacture our own diaphragm springs, we were able to keep the pedal load to a minimal 15% increase over the stock pedal load.
All ACT Race twin plate kits are dynamically balanced in house as an assembly for trouble free use.
