Haltech Elite 2500 With Mazda RX7 FD3S-S6 Plug 'n' Play Adapter Harness Kit | 1992-2002 Mazda RX-7 (HT-151328)

Elite 2500 With Mazda RX7 FD3S-S6 Plug 'n' Play Adapter Harness Kit by Haltech

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

Features

• Robust environmentally sealed waterproof case
• Drive by wire throttle control
• Intake and exhaust cam control
• Short term and long term map learning
• Dual channel knock control

Benefits

• Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
• fuel and ignition corrections for all stages.
• Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
• modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
• Sequential turbo control
• CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
• Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
• Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
• Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
• Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)

Please Note: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.

Applications

• 1992-2002 Mazda RX-7

What's In The Box?

• 1 - Elite 2500 ECU with DBW and Race Functions
• 1 - Injection molded plastic plug 'n' play adaptor harness
• 1 - M14 x 1.5 air temp sensor with matching plug and pins
• 1 - auxiliary I/O 16 Pin TYCO plug and pins
• 1 - USB programming cable and USB software key.

References

• Installation Instructions

Warranty

• Haltech Limited Warranty